Nano Player Headphone


Nano Player Headphone

Interactive Wav/MP3 OEM player with 6 headphone outputs




NanoPlayer Headphone, interactive audio player with 6 headphone ouputs


Nano Player  Headphone
  • The NanoPlayer Headphone OEM board was made for testing headphone in retail shop but you can use in any other application.
  • This board offer 6 amplified output to use up to 6 audio headphones.
  • You can connect an auxiliary audio input like a portable media player or all audio source. When a signal is detected, the board swap to this input and you can hear the aux source. When the signal disappear, the board swtich to the main internal MP3 player.
  • 3 push buttons are used to control the player. Volume +, volume - and "next file".
  • The NanoPlayer Headphone offer an autoplay function when switch on and you can select to play the file in random mode or sequential mode.
  • On demand, this is possible to place the Classic NanoPlayer firmware on this board. (Next file button  become Play another folder - see the NanoPlayer page and manual to check the difference)




NanoPlayer Headphone, interactive audio player with 6 headphone ouputs




NanoPlayer Headphone is perfect to create kiosks to tests headphone.

You can also use this player :

  • in museum to broacast informations
  • in stand to sell CD and listen some piece of music
  • To illustrate noise, animals ...
  • For advertising in a shop

 

 







NanoPlayer Headphone, interactive audio player with 6 headphone ouputs


 

  • Audio characteristics:

- Reads stereo MP3 files (MPEG ½ layer 3), 44.1KHz, from 112kbit/s to 320kbits/s
- Reads CBR (Constant Bit Rate) files and VBR (variable Bit Rate) files
- Reads stereo WAV files, 44.1kHz / 16 bit
- Volume setting = 32 steps

  • SD Memory card:

- Accepts SD card - 64Mo minimum to 4Go maximum - Formatted in FAT16 and FAT32
- Supports long file names
- 1 folders - 999 files maximum by folder

  • Interfacing :

- Status indicator LED
- Infrared sensor - Play, Stop, Next, Previous, Trigger, Volume +, Volume - Protocole SONY SIRC 12bits modulated at 38kHz
- 3 input on 2 pins connector (volume + / volue - / next file)
- 6 headphone amplified stereo output mini jack 3.5mm
- 1 audio auxiliairy input (line level)
- External power supply connector DC 2.1/5.5 and internal

  • Misc :

- Autoplay mode
- Play in random or sequential
- Size : 69 x 100 x 20 (mm)
- Classic NanoPlayer firmware on demand

  • Power supply:

- Nominal voltage: 12V DC
- Power supply range: 10V to 15V DC

Designed and manufactured in France




NanoPlayer Headphone, interactive audio player with 6 headphone ouputs




  • PSU GS18E12-P1J

GS18E12

  • Infrared remote control

Remote Control






NanoPlayer Headphone, interactive audio player with 6 headphone ouputs



Nano Player Headphone

 



PDF documentations :

Nano Player headphone - (English)