Micro Switch

Micro Switch
Controlled Power Switch




MicroSwitch - Controlled Power Switch

Micro Switch
  • The MicroSwitch is a power switch activated by input contact.
  • Connect the dry contact of the MicroSwitch to a push button, a relay or a capacitive sensor such as the ID-AL SensoPad to trigger the internal relay and power any type of electrical load in 110/220V and switch lamps, motors, electrical devices.
  • A dip switch available at the back of the device offers several configuration options. Switching can be activated for as long as the contact exists, on impulse, for an adjustable period based on the integrated timer or after an adjustable time delay ; nine commutation modes are provided by combination of dip switch positions.
  • The front face of the MicroSwitch carries a push button to action switching manually on the unit, the same way as the dry contact.
  • A rotary button allows adjusting of the integrated timer, from 0 to 12 seconds or from 0 to 12 minutes depending on the selected mode, with or without repeat switching possibility.

  • Depending on the position of the four dip switches, the Microswitch offers various switching modes and is therefore suitable for a wide range of applications.

1 - As long as - the relay is commutated as long as the contact is present

2 - Reverse as long as - the relay is commutated as long as the contact is NOT
present

3 - Impulsion mode - one impulsion triggers the relay, another one un-triggers it

4 - As long as with time delay - the relay is commutated as long as the contact is present
but with an adjustable time delay

5 - Time switch for adjustable time between 0 to 12 seconds - An impulsion triggers the
relay for the set time. Can be triggered again.

6 - Time switch for adjustable time between 0 to 12 minutes - An impulsion triggers the
relay for the set time. Can be triggered again.

7 - Time switch for adjustable time between 0 to 12 seconds - An impulsion triggers the
relay for the set time. Can only be triggered once.

8 - Time switch for adjustable time between 0 to 12 minutes - An impulsion triggers the
relay for the set time. Can only be triggered once.

9 - Permanent trigger


Micro Switch



MicroSwitch - Controlled Power Switch



MicroSwitch could be used alone with a push button, a sensor, a SensoPad or with a relay contact from EventPlayer or Flash MPX.

  • Shop window : Swtich Light, motors ...
  • Switch on/off electric product from a dry contact








MicroSwitch - Controlled Power Switch



  • Power supply :

- Nominal voltage: 12V DC
- Supply range: 10V to 15V DC

  • 12V power consumption:

- Not commutated: 10mA
- Commutated : 50mA

  • Commutation power:

- Voltage: 100 to 250 Volts
- Current: 5 A maximum

  • Dimensions :

- Width: 144mm - Height: 44mm - Depth: 67mm without knob / 87mm with knob
- Weight : 400g

  • Interfacing and connections :

- LED status indicator
- Push button
- Potentiometer for time delay setting
- 1 dry contact input on Phoenix 3.81mm pluggable connector
- 2 DC 2.1/5.5 power supply connectors
- 4 configuration DIP switches
- IEC connector 3 male pins (mains input)
- IEC connector 3 female pins (commutation output)



MicroSwitch - Controlled Power Switch

 

 

  • 19" Rack mount - Deep 120mm

Rack mount

  • Front plate for rack mount

Cache face avant

  • PSU NL120P050P

NL120P050P

 




MicroSwitch - Controlled Power Switch

 

  • Front face :
  
  • Rear face :
Micro Switch
Micro Switch

Micro Switch

 


PDF documentations :

MicroSwitch - (English)